The Yonico 14189 T-Track Router Bit cuts T-slots for T-track bolts with 1-1/8' wide x 5-16' high bolt heads and up to with 3/8' shaft thickness. Can also be used to make slat wall boards. WHITESIDE Special T-Slot Router Bits are designed to make easy work of creating your own professional woodworking jigs and fixtures. The Medium T-Slot measures 3/4' W and 3/16' H at the base with a 1/2' shank. It requires the cutting of a 3/8' straight groove prior to routing the “T”. I have a router bit for making slat wall panels. I built a jig to make my own, with slots going short ways across the sheet. I managed to cut one sheet with a 4 inch dust hose taped to the side of the router. Its too hard on my router. I wouldn’t do it again with out a panel router.
Key Hole Cutting Router Bits
- Reviews
2 flute, Carbide Tipped. Plunging the bit produces 3/8' or 1/2' hole and moving the router creates a T‑slot which will accept the head of a screw or nail. Used for hanging pictures, plaques, clocks, brackets, etc. flush to the wall without additional hardware.
Key Hole Cutting Instructions (PDF)
| Key Hole Cutting Router Bits | |||||
|---|---|---|---|---|---|
| Item | Large Diam. | Small Diam. | Shank Size | ||
| #5438 | 3/8' | 1/4' | 1/4' | $8.00 | |
| #5439 | 1/2' | 1/4' | 1/4' | $9.00 | |
| #7738 | 3/8' | 1/4' | 1/2' | $9.00 | |
| #7739 | 1/2' | 1/4' | 1/2' | $9.50 | |
all customer reviews and ratings
T-Slot Router Bits
- Reviews
2 flute carbide tipped. Make horizontal T‑slots for accepting the head of a bolt and a washer. Also used for making T-slots for hanging brackets in wall panels for commercial display units.
T‑Slot Router Bit Instructions (PDF)
| T-Slot Router Bits | |||||||
|---|---|---|---|---|---|---|---|
| Item | Large Dia. | Small Dia. | Height of t‑cut | Carbide Height | Shank Size | ||
| #6333 | 3/4' | 3/8' | 1/8' | 5/8' | 1/4' | $12.00 | |
| #6334 | 3/4' | 3/8' | 1/4' | 3/4' | 1/4' | $17.00 | |
| #8637 | 1' | 3/8' | 3/8' | 7/8' | 1/2' | $18.00 | |
all customer reviews and ratings
Average Customer Rating: (1 reviews)
Add your own review for this product
By Bruce Erdman (GREENDALE Wi US)
I cut a groove before using this bit to form the kerf of the T-slot. Worked smoothly, for me, in hard maple.
Key Hole Cutting Router Bits
- Reviews
2 flute, Carbide Tipped. Plunging the bit produces 3/8' or 1/2' hole and moving the router creates a T‑slot which will accept the head of a screw or nail. Used for hanging pictures, plaques, clocks, brackets, etc. flush to the wall without additional hardware.
Key Hole Cutting Instructions (PDF)
| Key Hole Cutting Router Bits | |||||
|---|---|---|---|---|---|
| Item | Large Diam. | Small Diam. | Shank Size | ||
| #5438 | 3/8' | 1/4' | 1/4' | $8.00 | |
| #5439 | 1/2' | 1/4' | 1/4' | $9.00 | |
| #7738 | 3/8' | 1/4' | 1/2' | $9.00 | |
| #7739 | 1/2' | 1/4' | 1/2' | $9.50 | |
all customer reviews and ratings
T-Slot Router Bits
- Reviews
2 flute carbide tipped. Make horizontal T‑slots for accepting the head of a bolt and a washer. Also used for making T-slots for hanging brackets in wall panels for commercial display units.
T‑Slot Router Bit Instructions (PDF)
| T-Slot Router Bits | |||||||
|---|---|---|---|---|---|---|---|
| Item | Large Dia. | Small Dia. | Height of t‑cut | Carbide Height | Shank Size | ||
| #6333 | 3/4' | 3/8' | 1/8' | 5/8' | 1/4' | $12.00 | |
| #6334 | 3/4' | 3/8' | 1/4' | 3/4' | 1/4' | $17.00 | |
| #8637 | 1' | 3/8' | 3/8' | 7/8' | 1/2' | $18.00 | |
all customer reviews and ratings
Average Customer Rating: (1 reviews)
Add your own review for this product
By Bruce Erdman (GREENDALE Wi US)
T Slot Router Bits For Wood
I cut a groove before using this bit to form the kerf of the T-slot. Worked smoothly, for me, in hard maple.